Joinery Company in Dubai
Made in our own workshop, fitted by our own team — in 30 days.
10–100k
AED Project Range
What we do
One workshop, not a supply chain.
Most joinery companies in Dubai do not own a workshop. They take the order, mark it up, and send the drawings to a unit in Al Quoz or Sharjah industrial — which is where the delays start, and where nobody can tell you why a door does not close. We make our joinery ourselves, in our own workshop, with our own team fitting it. It is the same workshop behind every kitchen renovation we deliver.
That changes what you can ask for. There is no “nearest standard size” to work around, so a sloped soffit, a structural column or a wall that is 40mm out of square is measured and built for, not hidden behind a filler panel. Moisture-resistant boards, sealed edges and European hinges and runners come as standard on every kitchen cabinet we make, because Dubai humidity is hard on cheap carcasses.
Kitchens are most of what we build, but the same workshop makes wardrobes, bathroom vanities, walk-in closets, TV units and built-in storage. If you are renovating a whole home — the kitchen and the bathrooms together — it is the same team, the same finishes and one contract rather than four.
Drag to see what 30 days does.
Send a photo on WhatsApp and we will tell you honestly what is possible — before you commit to anything.
WHAT WE MAKE
Complete Refit
Demolition through handover, under one team. One warranty covers the whole job — not just the cabinets — so nothing falls through the gap between trades.
Kitchen joinery
Full-height storage, appliance towers, islands and pantry units — the same made-to-measure approach as our custom kitchen cabinets, built to the millimetre of your room rather than to a catalogue width.
Wardrobes & closets
Hinged, sliding or walk-in, with internal drawers, shoe racks and lit rails — fitted floor to ceiling so nothing is wasted above.
Bathroom vanities
Wall-hung or floor-standing units with stone tops and integrated basins, built from boards rated for a wet room — fitted as part of a bathroom renovation or on their own.
Built-in storage
TV units, study desks, understair storage and the awkward alcove nobody else wants to quote for — plus the larders and pull-outs that make a small room hold twice what it did.
Built for one room, not off a shelf.
Bespoke joinery / Full-height storage / Push-to-open fronts / Walk-in wardrobes / Moisture-resistant carcasses / European hardware Bespoke joinery / Full-height storage / Push-to-open fronts / Walk-in wardrobes / Moisture-resistant carcasses / European hardware
Choose your finish
Pick a finish, we will price it at the site visit.
01
size apartments
Crisp & Minimal
Handleless fronts and matte neutrals
02
Best for small & mid-
size apartments
Deep Emerald Drama
Rich lacquer with brass hardware
03
size apartments
Modern & Bold
Wood-grain and high-contrast fronts
Cannot decide between two finishes?
Every piece we make, regardless of finish.
Green means it is in every job we do, no exceptions. Amber means it depends on your space — tap any line for the honest reason why.
Always included
5 of 5 kitchens, every time
- 3D design and unlimited revisions until you approve
- Moisture-resistant boards with fully sealed edges
- European soft-close hinges and drawer runners as standard
- A fixed price agreed before we start — no mid-job surprises
- A 3-year warranty on the finished work
Confirmed at your site visit
Depends on your specific kitchen
- Exact measurements and any structural constraints
- Whether existing joinery can be reused or has to come out
- Community NOC requirements and access hours
- Final material, finish and hardware selections
Want this checked against your own space?
HOW IT WORKS
Five steps, no surprises.
Every piece is measured, drawn, made and fitted through one process, by one team.
01
Consultation
A free site visit. We measure, photograph and check your community NOC rules. Fixed price within 5 days.
02
Design
3D layout, finish direction and real material samples. Yours to keep.
03
Build
Every unit is cut and assembled in our own workshop, to your measurements.
04
Install
Our own fitters, not a subcontracted crew. Thirty days from demolition to handover.
05
Handover
We clean up, walk you through the finished work, and register your warranty.
Joinery made and fitted across Dubai.
FAQs
Do you have your own joinery workshop in Dubai?
Yes. Every unit we fit is cut and assembled in our own workshop by our own team. Most joinery companies in Dubai are trading companies that outsource production — which is why a delay at the factory becomes your delay, and why nobody can explain a bad join. One workshop means one name on the result.
What is the difference between joinery and carpentry?
Carpentry is structural work cut on site — framing, doors, timber work. Joinery is made in a workshop to exact measurements and then fitted: kitchens, wardrobes, vanities, built-in storage. Everything on this page is joinery, which is why the measuring matters more than the fitting.
What materials do you use for joinery in Dubai's climate?
Moisture-resistant MDF or plywood carcasses with fully sealed edges, and European hinges and runners. We never use raw chipboard — it swells in a humid kitchen or bathroom and the doors stop closing square within a year or two.
Can you match new joinery to what is already in my home?
In most cases, yes. Send a photo and the measurements and we will tell you honestly how close a match is possible. Wood grain and lacquer colours can usually be matched; older laminates sometimes cannot, and we will say so rather than get halfway through.
Do you take on joinery for a whole home, or only kitchens?
Both. Kitchens are most of what we build, but the same workshop makes wardrobes, vanities, TV units and built-in storage. Clients doing a villa kitchen renovation often add the wardrobes at the same time — one contract, one team, one set of finishes across the home.
How much does bespoke joinery cost in Dubai?
It depends on the size of the run, the material and the finish. Bespoke costs more than flat-pack but uses space flat-pack cannot, and lasts far longer. Our cost calculator gives a rough figure, and you get one fixed price within five days of a free site visit, with no obligation.
If you are looking for a joinery company in Dubai that actually makes what it sells, send us a photo of the space and the rough dimensions. You can also look through our completed projects. We reply on WhatsApp within 24 hours, measure for free, and come back with a fixed price within five days.
let’s begin a conversation
Tell us about your space and we’ll come back with a fixed price. Fields: Name · Email · Contact number · Property type · Community · Room · Timeline · Budget band · Message. Button: Get a quote.
